1、機器運行時，除操作員外禁止其他人員進入工作區。

1, when the machine is running, in addition to operating personnel to prohibit other personnel in the work area.

2、遇緊急狀況，立即按“急停開關”使機器停止運轉。

2, in case of emergency, immediately press the "emergency stop switch" to stop the machine.

3、手動調試時，必須在鋸片運轉正常后再切割，否則會頂壞鋸片。

3, manual debugging, must be normal after the saw blade cutting, otherwise it will top the saw blade.

4、所有接線及插頭不可帶電插拔。

4, all wiring and plug can not be live plug.

5、對門窗設備要不定期地進行檢查，事故隱患。開齒穿條一體機

5, the doors and windows equipment should be checked regularly, to eliminate accidents.